pi3_tablet:
- pi3 with 7in display (https://www.raspberrypi.com/products/raspberry-pi-touch-display/) & enclosure
INSTALL:202408181341
- using raspios-bookworm-arm64 image (with desktop)
- first boot
  = setup user => common!
  = skip update - do that later
- reboot
  = display is inverted (Menu>Preferences>Screen Configuration)
    > right click DSI-1
  = update system (if applicable)
  = customize system (Menu>Preferences>Raspberry Pi Configuration)
    > set hostname
    > enable ssh & i2c
- reboot
  = install: vim geany screen
  = remove: nano
  = touch is independent of display setting (inverted)
    > edit /boot/firmware/config.txt (insert:dtoverlay=vc4-kms-dsi-7inch,invx,invy)
    > also need this (dtparam=i2c_vc_baudrate=50000)
- get my usual stuff from codeberg
  = my1shell, my1linuxpi, my1codelib, my1codebase
  = my1imgpro, my1imgproX