Note: This is an alternative to using Raspbian. Although not necessary, reading how-to on preparing the SD card is recommended.
work in progress…
- download image from https://distro.ibiblio.org/tinycorelinux/ports.html - select latest stable image (in zip format) - unzip and dd to sdcard - use fdisk to resize second partition (linux) = e.g. fdisk /dev/sde = watch the start block! - use resize2fs to resize to full capacity = e.g. resize2fs /dev/sde2 - reboot and do stuffs = [INIT] filetool.sh -b = [BASE] tce-load -wi TC = [MINE] tce-load -wi compiletc git geany fdisk -lu /path/disk.img -> in sector counts (usually 512-bytes sectors) mount -o loop,offset=xxxx /path/disk.img /mnt/disk.img.partition -> offset in bytes! picore requires: > tce-load -wi i2c-tools > sudo modprobe i2c-dev i2cdetect -y 1