User Tools

Site Tools


notes:misc

General Notes

Miscellaneous…

SQ11 Info

Useful info on sq11 mini cam…

sq11_info.txt
Operating Instructions SQ11
 
Charging
Attention! Before using for the first time, fully charge the mini camera
battery!
 
This mini video camera has a built-in lithium-ion battery. You can perform
charging in one of the following ways:
1. Connect the mini video camera to the USB port of your PC, stop recording
   first.
2. Connect the mini camera to a charger from a 220V network or a portable 5V
   charger. In this case, you can continue to use the mini-camera in the
   charging process. In the charging process, the blue and red LEDs will light
   constantly.
 
After the mini camera battery is fully charged, the blue LED will light
constantly and the red LED will turn off.
 
- If the built-in battery is empty or there is not enough space on the memory
  card to continue, the blue and red LEDs on the mini camcorder will blink for
  5 seconds simultaneously, after which the mini camcorder will save the
  recorded video and automatically turn off.
- If the memory card is not installed, the blue and red LEDs of the Mini
  Recorder will blink simultaneously for 5 seconds, after which the Mini Camera
  will automatically turn off.
- If the camcorder is in the standby mode and does not take any action on it,
  the camcorder automatically turns off after 1 minute to save the charge of
  the built-in battery.
 
Video recording
 
- Shooting video with a resolution of 1280X720P
Press the <On / Off> button to turn on the mini camera - the blue LED will
light up - the mini camcorder is in the video recording standby mode with 720p
quality. Press the <On / Off> button once to start recording video - the blue
LED will blink 3 times and go out - 720p video is recorded. The video will be
automatically saved every 5 minutes. To stop recording, press the <On / Off>
button.
 
- Shooting video with a resolution of 1920X1080P
Press the <On / Off> button to turn on the mini camera - the blue LED will
light constantly. Press the <Mode> button once to enter the video capture mode
with 1080p resolution - the red and blue LEDs will light simultaneously, the
mini camera is in the video recording standby mode with 1080p quality. To start
recording, press the <On / Off> button once - the blue LED will go out, and the
red LED will blink 3 times and go out - the video is recorded with a quality of
1080p. The video will be automatically saved every 5 minutes. To stop
recording, press the <On / Off> button.
 
- Motion sensor video recording
To do this, while in the 720p or 1080p video recording standby mode, press and
hold the <Mode> button of the mini video camera for 3 seconds - the camcorder
enters the motion sensor recording mode. If motion is detected, the video
recording will start automatically, with red and blue LEDs blinking at the same
time. When recording motion sensor, the video recording is automatically saved
every 5 minutes.
 
- Photo
Press the <On / Off> button to turn on the camera - the blue LED will light up.
Press the <Mode> button twice to enter the photographing mode - the red LED
will stay lit. To take a picture, press the <On / Off> button once - the red
LED blinks once, the photo is saved. The resolution of the received photos is
4032x3024.
 
- Night light
Press the <On / Off> button to turn it on. Press and hold the <On / Off> button
for 2 seconds - the red LED will blink twice - the night illumination is on. To
turn off the night illumination, press and hold the <On / Off> button for 2
seconds, the red LED will blink three times - the night illumination is turned
off.
 
- Shutdown
To turn off the camcorder, press and hold the <On / Off> button for 6 seconds.
If the Mini Camcorder is in the standby mode and is not in use, it
automatically turns off after 1 minute.
 
- Viewing files
Do connect the camcorder in the off state to the computer - after a few seconds it
will automatically be detected as a removable disk. The blue indicator will
indicate the transfer of information, and the red indicator will indicate the
charging of the built-in battery.
 
Parameters
- Video resolution: 1920x1080, 1280x720
- Frame rate: 15, 30 frames per second
- Video file type: AVI
- Photo resolution: 4032x3024
- Photo file type: JPEG
- Viewing angle: 140 °
- Night illumination: 6 IR LEDs (range of 5 meters, DO NOT emit light!)
- Motion sensor: Yes (range 5 meters)
- Recording while charging: +
- Duration of work:
  > 100 minutes (1 hour 40 minutes) in constant recording mode
  > About 5 hours in motion sensor mode
  > 24/7 24/7 clock when external power is connected
- Support for memory cards: Micro SD up to 64GB
- Cyclic recording: +
- Operating temperature: -10 ° С + 60 ° С
- Humidity of the environment: 15-85%
- Dimensions: 23x23x23 mm, 15 grams
 
Mini camera SQ11 with night illumination, motion sensor and viewing angle 140°.
Mini DV SQ11 is an improved version of the previous SQ8 and SQ9
 
The camera SQ11 has a built-in motion sensor, can shoot photos with a
resolution of 4032x3024, and can also be used for recording in the process of
charging from a 220V network or portable chargers, which increases the battery
life by 30-40 times.

Solar panel stuff

solar_power_system_calc.txt
- inverter?
- battery?
- solar panel?
 
1) load calculation
- assume 4x25w led light, 2x80w fan, 1x40w tube light, 1x50w tv
- total power = 100w + 160w + 40w + 50w = 350w
 
2) inverter selection
- load = 350w (oonsider: 500w)
- recommended: 800w-1000w
 
3) battery selection
- assume 12v dc battery
- for 350w ac load, i(dc) = 350w/12v = ~30a
- assume battery operation of 8h
- battery capacity = 30a x 8h = 240ah
# 250ah battery available!
 
4) battery charging current calculation
- assume 250ah
- charging current = ~10% current rating (Ah)
- charging current = 25A
 
5) solar panel selection
- solar panel current = charging current + load current = 25 + 30 = 55A
- solar panel power = 12v x 55A = 660W
- solar panel options: 125w / 180w / 375w / 440w
- solar panel count = 660W / 180W = ~4!

Chakras (From Avatar:The last Airbender)

Interesting…

chakras.txt
release all 7 chakras (from avatar :p)
 
1-earth (base of spine) root
  => survival, block by fear
  => release/surrender all fears
 
2-water (lower ab - below navel) sacral
  => pleasure, block by guilt
  => release all blame/guilt (forgive yoursef)
 
3-fire (stomach) solar plexus
  => power, block by shame
  => release letdowns and disappointments
 
4-love (heart)
  => love, block by grief
  => release all sadness and loss
 
5-sound (throat)
  => truth, block by lies
  => release denials and lies
 
6-light (center of forehead) @third eye
  => insight, block by illusion
  => release all illusions (collective conscious)
 
7-thought (crown of the head)
  => pure cosmic energy, block by earthly attachment
  => release all earthly attachments
notes/misc.txt · Last modified: 2024/03/15 10:43 by azman