dumped for now…

pi0_config.txt

- Raspberry Pi OS lite
  = for Pi Zero (bookworm armhf lite)
- write image to sd card, boot
  = english (us) keyboard layout
  = setup username/password
- change hostname (default is raspberrypi)
$ sudo raspi-config nonint do_hostname <hostname>
- change locale (default is en_GB.UTF-8)
$ sudo raspi-config nonint do_change_locale en_US.UTF-8
  = reboot, make sure locale properly set up
- enable ssh
$ sudo raspi-config nonint do_ssh 0
- change timezone
$ sudo timedatectl set-timezone Asia/Kuala_Lumpur
 
- (optional) if not using wifi (e.g. on pi 1), disable wpa_supplicant
$ sudo systemctl disable wpa_supplicant
- (optional) change wifi country
$ sudo raspi-config nonint do_wifi_country MY
- (optional) disable camera
$ sudo raspi-config nonint do_camera 1
- (optional) running lite most probably do not need much graphics!
$ sudo raspi-config nonint get_config_var gpu_mem /boot/config.txt
$ sudo raspi-config nonint do_memory_split 32
- (optional) run update
$ sudo apt update
$ sudo apt upgrade
 
- install/remove stuff
$ sudo apt install vim git screen
$ sudo apt remove nano
 
- get my stuff (git): my1shell, my1linuxpi, my1codelib, my1codebase